Siemens OP5 Equipment Manual page 5

History The different editions of the equipment manual refer to the following Pro-
Tool/Lite versions or OP firmware versions.
Edition
Other support
For technical questions, get in touch with your local Siemens representative.
You will find the addresses in appendix F of this manual, in our catalogs and
under Compuserve (go autforum) to mention a few examples. In addition,
our hotline is ready to help you (telephone +49 (911) 895–7000,
fax +49 (911) 895–7001).
Abbreviations
AS511
ASIC
CPU
EM
EPROM
EV
FB
IF
LCD
LED
MPI
OD
OP
PLC
PPI
PU
RAM
SRAM
VF
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
Remarks
06/95 First edition of the manual
01/96 Expansion of the manual
to include recipe and
scheduler functions
Protocol of the PU interface to the SIMATIC S5
Application-specific integrated circuit
Central processing unit
Equipment manual (German abbreviation: GHB)
(with UV light) erasable programmable read-only memory
Event messages
Function block
Interface designation
Liquid-crystal display
Light-emitting diode
Multitpoint Interface
Output double word (on the PLC)
Operator Panel
Programmable Logic Controller
Point to Point Interface
Programming Unit (German abbreviation: PG)
Random access memory (working memory)
Static RAM (buffered)
Vacuum fluorescence
ProTool/Lite- OP-Firmware
Version
Up to V 1.01 OP5: From V 1.20
OP15: From V 2.20
From V 2.0 OP5: From V 1.30
OP15: From V 2.30
Preface
iii