Examination For Installation Method In Enclosure - Mitsubishi Electric MELSEC iQ-F FX5U User Manual

5.2

Examination for Installation Method in Enclosure

Examine the installation location of PLC considering the environmental conditions (Page 19 Generic Specifications).
The PLC can be installed by the following methods.
Keep a space of about 2 mm between the products.
Installing on DIN rail
• The PLC can be installed on a DIN46277 rail (35 mm wide).
• The PLC can be easily moved and removed.
• The PLC installation height is the same as the DIN rail.
For details on the procedures for installing on and detaching from DIN rail, refer to Page 77 Procedures for Installing on
and Detaching from DIN Rail.
■Example of installation
FX5U-32MR/ES
DIN rail
*1
FX5-CNV-BC
*1 FX5-CNV-BC can only be installed directly.
Installing directly
• The PLC can be installed directly in the enclosure with M4 screws.
For mounting hole pitch, refer to Page 80 Hole pitches for direct mounting.
■Example of installation
FX5U-32MR/ES FX5-16EX
FX5-CNV-BC
FX5-16EX FX5-40SSC-S
5 INSTALLATION
76
5.2 Examination for Installation Method in Enclosure
2 mm
FX5-16EX FX5-16EYT
2mm
FX5-16EX FX5-40SSC-S
2mm
FX5-16EYT
2mm
(+ indicates an M4 screw.)
Extended extension cable
• FX5-30EC
• FX5-65EC
DIN rail
(+ indicates an M4 screw.)
Extended extension cable
• FX5-30EC
• FX5-65EC