Installation Method - Mitsubishi Electric FA-LTB40ADG User Manual

3. INSTALLATION METHOD

3-1 Connecting the Connection Cable and Terminal Block Conversion Module with MELSEC-Q Series
For MELSEC-Q series module with insulation between channels
(Q68AD-G, Q66AD-DG, Q66DA-G, Q68TD-G-H01, Q68TD-G-H02, Q68RD3-G)
Mitsubishi Electric Corporation
MELSEC-Q series module with
insulation between channels
Q68AD-G
Q66AD-DG
Q66DA-G
Q68TD-G-H01
Q68TD-G-H02
Q68RD3-G
Ground the FG wire in the
same manner as the
programmable controller
module.
Q68TD-G
RUN ALM
ERR.
Q68TD-G
Connection cable
FA-CBL**Q68ADG
FA-CBL**Q68ADGN
**Q66ADDG
FA-CBL
FA-CBL**Q66DAG
FA-CBL**Q68TDG
FA-CBL**Q68RD3G
Terminal block
conversion module
FA-LTB40ADG
FA-LTB40ADGN
FA-LTB40ADDG
FA-LTB40DAG
FA-LTB40TDG
FA-LTB40RD3G
Ground the FG wire in the same
manner as the programmable
controller module.
Insert the connector to the back, and
then fully install the connector to the
programmable controller module
using the mounting screws.
Insert the connector to the back,
and then fully secure the
connector with the clip.
Voltage/Current input/output
Dual wire transmitter input
Thermocouple input
RTD input
10