Mitsubishi Electric MELSEC iQ-F FX5U User Manual page 106

■Input circuit
• Function of input circuit
The primary and secondary circuits for input are insulated with a photocoupler, and the second circuit is provided with a C-R filter.
The C-R filter is designed to prevent malfunctions caused by chattering of the input contact and noise from the input line.
Input has a response delay switching from ON to OFF and OFF to ON, shown in the following table.
Item
Input response time FX5U-32M
(H/W filter delay)
FX5U-64M, FX5U-80M
High-speed pulse input/output module
FX5U-32M
FX5U-64M, FX5U-80M
High-speed pulse input/output module
FX5U-64M, FX5U-80M
Input module, Input/output modules, Powered input/
output module
• Change of filter time
All input circuits have digital filters, and the input response time shown in the following table can be added by setting parameters.
When using this product in an environment with much noise, set the digital filter.
Item
Input response time
(Digital filter setting value)
■Input sensitivity
For input signal current and Input sensitivity current of the CPU module, refer to Page 23 Input Specifications.
For input signal current and Input sensitivity current of the I/O modules, refer to Page 171 Input specifications.
■Display of operation
The LED turns ON when the photocoupler is driven.
With FX5-C32EX/ or FX5-C32ET/, the LED target is switched with the DISP switch.
• FX5-C32EX/: Smaller number (F)/Larger number (L)
• FX5-C32ET/: Input (IN)/Output (OUT)
6 WIRING
104
6.5 Input Wiring
X0 to X5
X0 to X7
X0 to X5
X6 to X17
X10 to X17
X6, X7
X20 and
subsequent
Specifications
None, 10 s, 50 s, 0.1 ms, 0.2 ms, 0.4 ms, 0.6 ms, 1 ms, 5 ms, 10 ms (initial values), 20 ms, 70 ms
Specifications
ON: 2.5 s or less
OFF: 2.5 s or less
ON: 30 s or less
OFF: 50 s or less
ON: 50 s or less
OFF: 150 s or less