Rules Of System Configuration And Examples Of Reconfiguration; System Configuration Example - Mitsubishi Electric MELSEC iQ-F FX5U User Manual

4.5
Rules of System Configuration and Examples of
Reconfiguration
The rules of system configuration are explained below referring to a sample system configuration using an expansion board,
expansion adapter, I/O module, and intelligent function module.

System configuration example

The following system configuration is under consideration.
FX5U-32MR/ES
FX5-232-BD
Check of limitation on the number of modules
Check if the sample system configuration is within the connectable-module range.
■Number of connected expansion boards
(Page 50 Number of connected expansion boards)
Type
Expansion board
■Number of connected expansion adapters
(Page 50 Number of connected expansion adapters)
Type
Expansion adapter (Communication)
■Number of connected extension modules
• Number of modules connected on whole system
(Page 51 Overall system limitation)
Type
Extension module
Bus conversion module
• Number of modules connected to the CPU module
(Page 51 Connection to the CPU module)
Type
Total No. of I/O modules, intelligent function modules, and bus conversion modules
Total No. of intelligent function module and bus conversion modules
4 SYSTEM CONFIGURATION
64

4.5 Rules of System Configuration and Examples of Reconfiguration

The number of transmission points
setting for AnyWireASLINK
64 points
Remote I/O Remote I/O
station station
No. of modules used Limitations
1
No. of modules used Limitations
2
No. of modules used Limitations
11
1
CC-Link
Remote I/O
station
Only 1
Up to 2
Up to 16
(Extension power supply modules and connector
conversion module are excluded.)
Only 1
No. of modules used Limitations
11 Up to 12
7 Up to 8
To CC-Link
master station
Judgment
OK
Judgment
OK
Judgment
OK
OK
Judgment
OK
OK