Connecting Method F - Connection Of An Extension Module (Extension Connector Type); Connection Method G - Connection Of An Fx3 Extension Module To The Bus Conversion Module - Mitsubishi Electric MELSEC iQ-F FX5U User Manual

Connecting method F - connection of an extension module
(extension connector type)
This subsection explains how to connect the extension module (extension connector type).
1.
Slide the hook for coupling the extension module (A in the right
figure) of the existing module (left side).
2.
Remove the subsequent extension connector cover (B in the
right figure).
3.
Connect an extension module as shown in the right figure.
4.
Slide the hook for coupling the extension module (A in the right
figure) of the existing module to fix the extension module (C in
the right figure).
Connection method G - connection of an FX3 extension module
to the bus conversion module
The procedure for connecting the FX3 extension module to the bus conversion module is explained below.
1.
Connect the FX3 extension cable (A in the right figure) from
the extension module to the extension connector of the bus
conversion module.
This illustration is FX5-CNV-BUS. When FX5-CNV-BUSC is
used, connect the extension cable to the bus conversion module
in the same way.
4 4
A
5.5 Connection Methods for CPU Module and Extension Devices
A
B
A
C
A
4 4
3
3
3
A
5 INSTALLATION
5
87