Mitsubishi Electric MELSEC iQ-F FX5U User Manual page 175

Output specifications
There is the simultaneous ON ratio of available PLC inputs or outputs with respect to the ambient temperature.
For details, refer to Page 26 Input/Output Derating Curve
■Relay output
Item
No. of output points FX5-8EYR/ES
FX5-16EYR/ES
FX5-32ER/S
Connection type
Output type
External power supply
Output circuit insulation
Indication of output operation
Max. load
Open circuit leakage current
Min. load
Response time OFFON
ONOFF
Output circuit configuration
■Transistor output (sink output)
Item
No. of output points FX5-8EYT/ES
FX5-16EYT/ES
FX5-32ET/S
FX5-16ET/ES-H
FX5-C16EYT/D
FX5-C32EYT/D
FX5-C32ET/D
Connection type FX5-EYT/ES,
FX5-32ET/S,
FX5-16ET/ES-H
FX5-CEYT/D,
FX5-C32ET/D
Output type
External power supply
Output circuit insulation
Indication of output operation
Specifications
8 points
16 points
16 points
Terminal block (M3 screws)
Relay
30 V DC or less
240 V AC or less
(250 V AC or less when the module does not comply with CE UL, cUL standards)
Mechanical insulation
LED is lit when output is on
2 A/point
The total load current of resistance loads per common terminal should be the following value.
• 4 output points/common terminal: 8 A or less
• 8 output points/common terminal: 8 A or less

5 V DC, 2 mA (reference values)
Approx. 10 ms
Approx. 10 ms
Load
Y
DC power
supply
COM0
Fuse
Y
AC power
supply
COM1
Fuse
Specifications
8 points
16 points
16 points
8 points
16 points
32 points
16 points
Terminal block (M3 screws)
Connector
Transistor/sink output
5 to 30 V DC
Photo-coupler insulation
LED is lit when output is on
• With FX5-C32EYT/, the lower number/higher number order is switched with the DISP switch F/L.
• With FX5-C32ET/, the input/output is switched with the DISP switch IN/OUT.
APPENDIX
173
Appendix 5 I/O Module
A