License Management; Requirements; Configuration Process - Avaya 3616 Installation And Configuration Manual

3616/3626 Wireless IP Telephone
Installation and Configuration Guide

6. License Management

The 3616/3626 Wireless IP Telephone system supports a number of different IP protocol integrations.
All 3616/3626 series Wireless Telephones are shipped from Avaya with a generic software load that
allows them to associate to a wireless LAN and download their functional software from a TFTP
server. The Wireless Telephones will not function properly without downloading appropriate
software.
The following details the process to properly configure 3616/3626 Wireless IP Telephone and
download software via over-the-air file transfer.
6.1

Requirements

• A wireless LAN must be properly configured and operational through the use of 802.11b
wireless access points.
• The Avaya Call Server must also be connected to your network and completely operational.
• A TFTP Server must be available on the network in order to load the appropriate software into
the Wireless Telephones.
• Finally, ensure that the Battery Pack on the Wireless Telephone is fully charged.
6.2

Configuration Process

1. Download the latest 3616/3626 Wireless IP Telephone – IP software from
http://www.spectralink.com/service/software.html
2. Place the latest version of the 3616/3626 Wireless IP Telephone code on the TFTP Server and
ensure the TFTP Server is started. The three files that are needed must be named slnk_cfg.cfg,
pd11ccc.bin, and phintl24.bin.
3. If statically assigning IP addresses, ensure that the
, and
Mask Default Gateway
Server, ensure that the DHCP option is set. See "3616/3626 Wireless IP Telephone
Configuration" section for detailed configuration instructions.
4. Ensure the Wireless Telephone has properly configured
within the Admin Menu. If you are accepting broadcast
handset will automatically learn the ESSID information when powering on. See "3616/3626
Wireless IP Telephone Configuration" section for detailed configuration instructions.
5. Using the Admin Menu on the Wireless Telephone, ensure the
set to . This ensures the handset will check for the proper software files each time it powers
009
on. See "3616/3626 Wireless IP Telephone Configuration" section for detailed configuration
instructions.
6. Power cycle the Wireless Telephone.
24
IP Address
information are accurate in the Admin Menu. If using a DHCP
,
TFTP Server IP
and
ESSID Reg Domain
at your access points, the
ESSIDs
License Mngt
555-301-107, Issue 1
,
Subnet
Information
menu option is
July 2003