Software License And Protocol Management; Requirements; Configuration Process - Avaya 3641 Installation, Configuration And Administration

5.

Software License and Protocol Management

The Avaya 3641/3645 Wireless IP Telephone System supports a number of different IP
protocol integrations. All Malta series Wireless IP Telephones are shipped from Avaya
with the correct software. However it may be necessary to update the software. Please see
section Software Maintenance for more information.
The following details the process to properly configure Avaya 3641/3645 Wireless IP
Telephones and download software via over-the-air file transfer.
5.1

Requirements

•
A wireless LAN must be properly configured and operational through the use of
802.11a/b/g wireless access points.
•
The Avaya Communication Manager must also be connected to your network and
completely operational.
•
A TFTP Server must be available on the network in order to load the appropriate
software into the Wireless IP Telephones.
•
The AVPP Server is installed and properly configured.
•
Software versions required:
Component
AVPP
OAI Server MOG 600
OAI Server MOG 700
•
Finally, ensure that the Battery Pack on the Wireless IP Telephone is fully charged.
5.2

Configuration Process

Follow these steps to configure the Wireless IP Telephone.
1. Contact your service representative for information about downloading the latest Avaya
3641/3645 Wireless IP Telephone – IP software.
2. Load the latest version of the Avaya 3641/3645 Wireless IP Telephone code and
place it on the TFTP Server and ensure the TFTP Server is started. The following five
files are needed:
usb downloader
functional filename
phintl filename
ota downloader
config file
3. If statically assigning IP addresses, ensure that the static addresses are accurate in
the Admin menu. If using a DHCP Server, ensure that the DHCP option is set. See
the Avaya 3641/3645 Wireless IP Telephone Configuration section for detailed
configuration instructions.
4. Ensure the Wireless IP Telephone has properly configured SSID and Reg Domain
within the Admin menu.
5. Using the Admin menu on the Wireless IP Telephone, ensure the Telephony Protocol
menu option is set to 33. This ensures the handset will check for the proper software
Version
17x.028 or higher
54.032 or higher
82.017 or higher
pd14udcc.bin
pd14ccc.bin
pi1400cc.bin
pd14odcc.bin
slink_cfg.cfg
License Management
Issue 1, January 2007 55