4.2
Configuring an Associated Station
To configure a 3616/3626 Wireless Telephone as an associated station, you must add a station on the
Avaya Call Server for the 3616/3626 Wireless Telephone and then associate that station with a desk
station.
To administer an associated station on the Avaya Call Server for a Wireless Telephone:
1. From the Avaya Call Server administration software, add a new station.
2. Set "Type" to "4606."
3. Set "Security Code" to the same security code used for the extension to which this Wireless
Telephone will be associated (that is, the desk station). You can use a different security code,
but to make it easier for the user it is recommended that you use the same security code as the
desk station.
4. Set "Message Lamp Ext" to the extension of the associated desk station.
When bridging the 3616/3626 to another phone (principal phone)
administer the 3616/3626 station's message lamp extension to be that of
the principal.
5. Set "Bridged Call Alerting" to "y."
6. Set "Auto Select Any Idle Appearance" to "y."
7. For Button Assignments, create bridged appearances to the line appearances on the desk
station.
8. Add additional feature buttons to buttons 4, 5, and 6, if desired.
9. Repeat Steps 1 through 8 for each Wireless Telephone.
When making changes to feature buttons, the phone must be power
cycled.
555-301-107, Issue 1
July 2003
3616/3626 Wireless IP Telephone
Installation and Configuration Guide
15