G Default Settings; Default Settings - Sharp AR-C260P Operation Manual

CONFIGURING THE OPERATION CONDITION SETTINGS

Default settings

The default settings are used to set conditions for printing in an environment where the print driver is not used (such
as printing from MS-DOS or from a computer that does not have the provided print driver installed).
NOTE
When a setting can be configured both in the printer driver and on the operation panel, the setting in the printer
driver overrides the setting on the operation panel. For this reason, settings in the printer driver should always be
configured in the printer driver, not on the operation panel.
The following settings are available:
I I I I Copies
This sets the number of copies of each page.
Default setting: 1
The number of copies can be set from 1 to 999.
I I I I Orientation
The image can be printed in portrait orientation or
landscape orientation.
Default setting: PORTRAIT
Selections: PORTRAIT, LANDSCAPE
I I I I Default paper size
This sets the paper size to be used for printing if a
paper size is not otherwise selected.
Default setting: A4 or LETTER
Selections: A3W, A3, B4, A4, B5, A5, LETTER,
LEDGER, LEGAL, FOOLSCAP, EXECUTIVE,
INVOICE
I I I I Default paper type
This sets the paper type to be used for printing if a
paper type is not otherwise selected.
Default setting: PLAIN
PLAIN, LETTER
PRE-PUNCHED, RECYCLED, COLOUR
I I I I Default output tray
This sets the output tray to be used for printing if an
output tray is not otherwise selected in the
application software.
Default setting: CENTRE TRAY
The trays that can be selected depend on the
peripheral devices that are installed.
3-4
HEAD, PRE-PRINTED,