Sharp AR-C260P Operation Manual page 23

NOTES
G Be sure to load A5 paper, 5-1/2" x 8-1/2" paper,
and postcards as shown in the diagram below.
Post cards.
A5 paper, 5-1/2" x 8-1/2" paper.
G When loading plain paper other than paper
recommended for colour or Sharp standard paper,
or when loading special media other than
postcards or SHARP-recommended transparency
film, or when loading paper to be printed on the
back, the paper must be loaded one sheet at a
time. Loading more than one sheet at a time will
cause misfeeds.
G Before loading heavy paper, straighten any curling
in the paper.
G When adding paper, remove any paper remaining
in the tray, combine it with the paper to be added,
and reload as a single stack.
G Do not use paper that has already been printed on
by a plain paper fax machine or a laser printer.
This may cause printed images to become dirty.
G When printing on transparency film, be sure to
remove each sheet as it exits the machine.
Allowing sheets to stack in the output tray may
cause curling.
G Use only SHARP-recommended transparency
film. Insert the film so that the rounded corner is on
the left for horizontal loading, or on the right for
vertical loading.
Horizontal
loading
G When loading multiple sheets of transparency film
in the bypass tray, fan the sheets several times
before loading.
Vertical
loading
LOADING PAPER
2
2-5