Functions Set By The User; Saving The User Default Settings - Sharp AJ-6110 Setup And Operation Manual

FUNCTIONS SET BY THE USER

Depending on your particular needs, you can save regularly used settings, and change the
functions of this unit.

SAVING THE USER DEFAULT SETTINGS

You can save the current settings on the unit as user default settings. Follow the steps shown
below.
You can save the following settings as user default settings; "Paper Type", "Paper Size",
"Colour Mode", "Copy Quality", "Brightness", "Intensity", "Zoom" and "Original Type". These
settings will remain even after once the power is turned off.
Press the "MENU" button, and repeatedly press the
1
"ARROW" buttons until "Feature Defaults" is shown on the first
line of the display panel.
Repeatedly press the
2
New" is shown on the second line of the display panel.
Press the "ENTER" button.
3
The current settings will be saved as the user default settings. The following
message will appear for one second after the "ENTER" button is pressed. The unit
will soon return to the ready state.
54
Downloaded from: http://www.usersmanualguide.com/
4.Feature Defaults
1.Save new
Saving new default
settings...
If you do not save the desired settings by "Save new", the previous settings set
as defaults will remain in effect.
The following settings are saved each time they are specified, and cannot return
to the default settings unless you run the Reset Factory function;
"Program Timeout", "Sleep Mode", "Paper Default", "Set Power timer?", "Auto
Power Off" and "Language".
or "ARROW" buttons until "Save
or