Misfeed In The Stand/1 X 500 Sheet Paper Drawer; Misfeed In The Stand/3 X 500 Sheet Paper Drawer - Sharp AR-C260P Operation Manual

MISFEED REMOVAL

Misfeed in the stand/1 x 500 sheet paper drawer

NOTE
Paper misfed from a paper tray may be extending out of the tray into the right side cover area. If the tray is drawn
out of the machine in this case, the paper may tear and become difficult to remove. To prevent this from happening,
always open the right side cover first and remove the misfed paper if it is extending into that area.
1 Open the upper and lower side covers.
NOTE
If paper is loaded in the bypass tray, remove the
paper and close the bypass tray before opening the
side cover.
2 Remove the misfed paper.
NOTE
The misfeed may have occurred inside the machine.
Check carefully and remove it.

Misfeed in the stand/3 x 500 sheet paper drawer

To remove a misfeed in the upper, middle, or lower tray, follow steps 1 through 5 above of "Misfeed in the stand/1
x 500 sheet paper drawer".
2-26
Push the blue lever
upward and gently open
the cover.
Be careful not to tear the
misfed paper during
removal.
3 If misfed paper is not found in step 2, pull
out paper tray 1 and remove the misfed
paper.
4 Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine.
5 Gently close the upper and lower side
covers.
Be careful not to tear the
misfed paper during
removal.
After closing, confirm
that the misfeed
message has been
cleared and the normal
display appears.