G Misfeed Removal; Misfeed Removal - Sharp AR-C260P Operation Manual

Misfeed removal

When a misfeed occurs in the large capacity tray, follow these steps to remove the misfed paper.
1 While holding the tray release lever,
carefully slide the large capacity tray away
from the main unit until it stops.
Release lever
Remove any misfed paper from the main
2
unit and the large capacity tray.
Upper right
side cover
3 Push the large capacity tray toward the
main unit and latch it into place.
4 If misfed paper is not found in step 2, pull
the tray out.
Be sure not to tear the
misfed paper during
removal.
Open and close the
upper right side cover of
the printer after
removing the misfed
paper from the printer.
If the misfed paper
cannot be removed
easily, open the upper
right side cover to
remove the paper.
When pulling the large
capacity tray out, be
sure to pull it out after
the paper tray control
button lamp goes out.
5 Remove the misfed paper.
Gently push the tray back into place.
6
LARGE CAPACITY TRAY
Confirm that the misfeed
display is cleared.
5-11
5