G Duplex Bypass/Inverter Unit (Optional); G Print Area; Duplex Bypass/Inverter Unit (Optional); Print Area - Sharp AR-C260P Operation Manual

SPECIFICATIONS

Duplex bypass/inverter unit (optional)

Number of sheets
Paper size
Page weight
Transport reference point
Dimensions
Weight

Print area

The print area of this product is shown below.
Approx. 4.3mm (11/64")
Approx. 4.3mm
(11/64")*
Approx. 4.3mm (11/64")
Paper size
Printable area
Some discrepancies may exist in the illustrations and content due to improvements to the machine.
6-4
1 sheet (non-stack method)
Face-up output: Same as paper feed specifications of the machine
Face-down output: A3W, A3, B4, A4, A4R, B5, B5R, A5, 12" x 18", 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, 8-1/2" x 5-1/2",
Face-up output: 64 to 300 g/m
Face-down output: 64 to 200 g/m
Centre reference point
156 mm (W) x 443 mm (D) x 432 mm (H)
(6-5/32" (W) x 17-29/64" (D) x 17-1/64" (H))
Approx. 6.5 kg (Approx. 14.4 lbs.)
Approx. 4.3mm
(11/64")*
(17 to 80 lbs.)
2
(17 to 54 lbs.)
2
The print area is the entire page excluding a margin of
4.3 mm (11/64") at each edge. The actual print area
may vary depending on the printer driver used and
software application.
* The print area of A3 wide paper is the entire page
excluding a margin of approximately 3 mm (1/8") at
each edge.