Sharp AR-C260P Operation Manual page 61

Paper size
Page weight
Paper types
Paper full detection
Offset function
Allowed paper sizes for
stapling
Maximum number
sheets for stapling
Stapling positions
Paper conveying
Power supply
Dimensions
Weight
Name
Model*
1
Number of holes
Paper sizes for hole
punching
*1 Multiple punch modules cannot be installed together. Some models may not be available in some regions.
*2 With AR-PN1B, two or three holes can be punched depending on the paper size.
*3 With AR-PN1C and AR-PN1D, the number of holes is the same. The hole interval, however, is not the same.
Specifications are subject to change for improvement without notice.
NOTES
G Transparency film, envelopes, postcards, and other special papers cannot be stapled.
G If mixed paper sizes are selected for stapling jobs, stapling will be automatically cancelled.
Supplies
AR-SC2 staple cartridges must be used for this finisher.
The cartridge package contains three cartridges of approximately 5000 staples
each.
Upper paper tray:
Face up output: Same as paper specifications of the machine
Face down output:A3W, A3, B4, A4, A4R, B5, B5R, A5, 12" x 18", 11" x 17",
Lower tray:
Upper tray:
Lower tray
Upper tray: Same as paper specifications of the machine
Lower tray: Plain paper only
Both upper and lower tray
Upper tray only (offset function not possible for A5R and 5-1/2" x 8-1/2"R size
paper)
Upper tray: A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R
Lower tray: A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
of
See page 2-4 of the Operation manual (for printer)
Upper tray: 3 locations (1 position back, 1 position front, 2 positions centre)
Lower tray: 120 mm (4-47/64") pitch from centre of paper
Centre reference
Supplied from the machine (Stand / paper drawer)
633mm(W) x 603mm(D) x 771mm(H) (24-59/64" (W) x 23-3/4" (D) x 30-23/64" (H))
Approximately 36kg (79.4lbs.)
Punch module
AR-PN1A
2
A3, B4, A4, A4R,
B5, B5R, 11" x 17",
8-1/2" x 14",
8-1/2" x 11",
8-1/2" x 11"R
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"
A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
64 to 300 g/m or 17 to 80 lbs. for face up output
2
64 to 200 g/m or 17 to 54 lbs. for face down output
2
64 to 105 g/m or 17 to 28 lbs.
2
AR-PN1B*
2
3 or 2
3 holes: A3, A4, A3, A4
11" x 17", 8-1/2" x 11"
2 holes: 8-1/2" x 14",
8-1/2" x 11"R
SADDLE STITCH FINISHER
AR-PN1C* AR-PN1D*
3
4
A3, B4, A4, A4R,
B5, B5R, 11" x 17",
8-1/2" x 14",
8-1/2" x 11",
8-1/2" x 11"R
5
3
4
5-3