Sharp AR-C260P Operation Manual page 63

I I I I Staple jam removal
1 Unlatch the saddle stitch finisher and slide
it away from the main unit.
2 Open the front cover.
3 Turn roller knob C as shown in the
illustration until the blue indication is
seen.
Roller knob C
Blue
Remove the paper from the stapler
4
compiler.
5 If saddle stitching was selected, open the
saddle stitch section cover.
SADDLE STITCH FINISHER
6 Remove the misfed paper.
7 Close the saddle stitch section cover.
8 Pull out the stapler section.
Turn roller knob A in the direction of the
9
arrow to move the staple unit to the front.
Roller knob A
Staple unit
10 Remove the staple box.
Be careful not to tear the
misfed paper during
removal.
Turn the roller knob A
until the triangle mark is
aligned with the index.
5-5
5