PART NAMES AND FUNCTIONS
Exterior
Without the duplex
bypass/inverter unit
installed.
Left tray
Finished sheets are deposited here.
Paper that cannot be output to the centre tray is
output face-up to the left tray.
Left side cover
Open this cover when a paper misfeed occurs in
the fusing unit or the transfer unit.
Main switch
Press to turn power on and off.
Front cover
Open to replace toner cartridge.
Operation panel
Centre tray
Finished sheets are deposited here.
Paper stopper
To prevent output paper from falling.
Bypass tray
Special papers (including transparency film) and
paper can be fed from the bypass tray.
*
,
,
and
are peripheral devices. For a description of these devices, see page 1-6.
1-4
Stand/1 x 500 sheet paper drawer * (See page
2-7)
Stand/3 x 500 sheet paper drawer * (See page
2-7)
Duplex module/2 x 500 sheet paper drawer *
(See page 2-8)
Paper tray
Each tray can hold approximately 500 sheets of the
recommended paper for colour (80 g/m
or approximately 500 sheets of SHARP standard
paper (80 g/m
or 20 lbs.).
2
Left side cover release
Push this release up to open the left side cover.
Duplex bypass/inverter unit * (See page 1-6)
or 20 lbs.),
2