Make A Call With The Speakerphone; Make A Call With A Headset; Make A Call With Uri Dialing; Redial A Number - Cisco 8811 User Manual

Make a Call with the Speakerphone

Make a Call with the Speakerphone
Procedure
Step 1
Enter a number using the keypad.
Step 2
Press Speakerphone
Related Topics
Headsets, on page 74

Make a Call with a Headset

Procedure
Step 1
Plug in a headset.
Step 2 Enter a number using the keypad.
Step 3
Press Headset

Make a Call with URI Dialing

You can place calls using URI dialing, which uses a SIP address as a directory number, such as
bob@example.com. When you enter a SIP address, do not pause for more than 10 seconds between key
presses. After 10 seconds of inactivity, the phone assumes that it has the complete address and attempts to
place the call.
When you make a call within your domain, you don't need to include the @example.com portion of the SIP
address. When you make a call outside of your domain, enter the whole SIP address, including the domain
name. The maximum length of a SIP address is 254 characters.
Procedure
Enter a SIP address and pick up the handset.

Redial a Number

You can call the most recently dialed phone number.
Cisco IP Phone 8800 Series User Guide
22
.
.
Calls