1.4.2
Dynamic Reconfiguration (DR)
The dynamic reconfiguration (DR) software is part of the Solaris OS. With DR you
can dynamically reconfigure CPU/Memory boards in order to safely remove them
or install them into a system while the Solaris OS is running. DR is performed with
minimum disruption to user processes running in the system.
The process of replacing a board while the system is still running is called hot-
plugging. DR provides this software hot-plug support. For more information on DR,
refer to Chapter 1, "Overview" and Chapter 9 "CPU/Memory Board Replacement
and Dynamic Reconfiguration (DR)" in the system administration manual.
1.4.3
Sun Management Center Software and SunSolve
OnLine
The Sun Management Center software monitors system functioning. The SunSolve
Online
information on the features and functionality of these products, see
TABLE 1-8
Software
Sun Management
Center software
SunSolve Online
service
Refer to the Sun Management Center Software User's Guide for more information.
service is an informational and patch database service. For more
SM
Sun Management Center Software and SunSolve Online Features
Function
• Monitors system functioning.
• Features a graphical user interface (GUI) to continuously display
system status.
• Informational and patch database service.
• Used by system administrators, network administrators, and
others who are responsible for maintenance of Sun hardware and
software.
TABLE 1-8
Chapter 1 Fault Isolation
.
1-15