Table of Contents
Advertisement
Printing IP Address Information
The pmsd slotaddressshow -s slot_num|all command can be used to print IP
address information for the specified slot or all slots. If the IP address information is
not 0.0.0.0 for a given slot, PMS is configured to manage the node board in this slot
using this IP address.
Adding Address Information for a Local Node
Board to Control Node Boards in Local or Remote
Systems
You can use the PMS CLI application to enable local node boards to remotely
monitor and control node boards in the same system or in other Netra CT systems.
One use for this capability is in a high availability environment. For example, if a
high availability application fails on a controlled node board, PMS notifies the
controlling node board of the failure, and the controlling node board (through a
customer application) notifies another controlled node board to start the same high
availability application.
The pmsd slotrndaddressadd command is used to configure a local node board
to control and monitor another node board by specifying the IP addresses and slot
information for the node board to be controlled, using the parameters shown in
TABLE 2-5
TABLE 2-5
Parameter
-s slot_num|all
ip_addr
-n
ip_addr
-d
-r slot_num
Each local node board can control and monitor 16 local or remote node boards. Each
local node board being managed must have already had its IP address set using the
pmsd slotaddressset command.
34
Netra CT 820 Server System Administration Guide • March 2004
.
slotrndaddressadd Parameters
pmsd
Description
Specifies the slot number of the node board that is being configured
in the local system to monitor or control other local or remote node
boards
Specifies the IP address of the node board in the local or remote
system to be monitored or controlled by the local node board
Specifies the IP address of the distributed management card in the
same local or remote system of the node board to be monitored or
controlled by the local node board
Specifies the slot number of the node board in the local or remote
system to be monitored or controlled by the local node board
Advertisement
Table of Contents
