Settings - Siemens DESIGO PXM20 User Manual

Notes
Siemens
Building Technologies
3

Settings

1. You can only carry out the settings described below if the
appropriate rights have been assigned to you. These rights are
allocated either in the engineering phase, or later by the system
administrator.
2. To be able to carry out settings and modifications, you must be
in a site (see Section 4).
Figure 3-1 Site overview
Open Alarming & functions for the current site.
This is where you will find all the entries which you use to modify
settings in the system using your PXM20 operator unit.
Figure 3-2 Alarming & functions
PXM20 / PXM20-E operator unit
Settings
17/70
CM110754en_02
17 Dec 2009