Graphic View - Siemens DESIGO PXM20 User Manual

Note The graph displayed with this option reflects past events only. To
54/70
Siemens
Building Technologies
10.3.2

Graphic view

The Graphic view displays a graph of all the values in the PXM20
for the logged data point.
view the values in real time, select Graphic view online
(Section 10.3.3).
Before displaying the sampled values in a graph, you can adapt the
display in Graphic view to your requirements, by modifying the
following parameters in the Trend configuration dialog box (Figure
10-3).
Figure 10-5 Parameters for the Graphic view
The two parameters Graphic start time and Graphic stop time can
be used to reduce the display window to a time-window of particular
interest to you. As default values for the Graphic start time and
Graphic stop time, enter the start and end of logging.
Use Compare with channel to compare the selected trend with
another trend you have set up (see Figure 10-9).
Select GRAPHIC to confirm your settings and display the trend.
PXM20 / PXM20-E operator unit
Trend function and settings
CM110754en_02
17 Dec 2009