Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Siemens Climatix POL822
Summary of Contents for Siemens Climatix POL822
- Page 2 Economy and Comfort. Using this button you can switch between the modes Mode Time Schedule, Economy and Comfort, when the air conditioning unit is on. 2 / 12 Siemens room unit QAA822 Building Technologies...
- Page 3 (low temperature of heating water, etc.). The particular information is displayed on the control panel of the Climatix controller or web viewer of the computer connected to the Climatix controller in the OS-designated switchboard. 3 / 12 Siemens room unit QAA822 Building Technologies...
- Page 4 . The speed can be reduced by the button Fans in six steps down to the speed corresponding to the Economy mode. This setting is possible only if the configuration parameters are adjusted for fan button control 4 / 12 Siemens room unit QAA822 Building Technologies...
- Page 5 Comfort mode are displayed. Change the temperature to the required value using the Plus or Minus buttons. The setting is quitted by the Info button or automatically after 30 seconds of inactivity. 5 / 12 Siemens room unit QAA822 Building Technologies...
- Page 6 EC motors are used. The fan operation is indicated on the display by the icon 13, in case of fan failure the icon is flashing. 6 / 12 Siemens room unit QAA822 Building Technologies...
- Page 7 Plus and Minus buttons. The setting is again confirmed by the Mode button and the setting of all communication parameters is quitted by repeated pressing the OFF/ON button. 7 / 12 Siemens room unit QAA822 Building Technologies...
- Page 8 Climatix controller or through the web viewer of the computer connected to the Climatix controller in the OS-designated switchboard. The parameter setting is described in the document „Detailed instructions for control through HMI Climatix“. 8 / 12 Siemens room unit QAA822 Building Technologies...
- Page 9 Ready for operation Disposal The device contains electrical and electronic components and must not be disposed as domestic waste. The valid local legal regulations are to be observed! 9 / 12 Siemens room unit QAA822 Building Technologies...
- Page 10 Mechanical conditions class 3M1 class 2M2 Electromagnetic compatibility Industry standards Immunity for residential, commercial EN 61000-6-1:2001 and light-industrial environments Emission standard for residential, EN 61000-6-3:2001+A11:2004 commercial and light-industrial environments CE conformity 10 / 12 Siemens room unit QAA822 Building Technologies...
- Page 11 Make yourself familiar with the 2004/108/EC requirements for CE marking as defined in the EMC directive Dimensions See: “Dimensions” Colour Front cover, rear cover, buttons RAL9003 – white Weight Without packaging 0.12 kg 11 / 12 Siemens room unit QAA822 Building Technologies...
- Page 12 device power supply, data (positive) device power supply, data (negative) Negative Positive Dimensions (units: mm) Connection of the room unit to the Climatix controller Climatix controller Process Bus Room unit Room unit 12 / 12 Siemens room unit QAA822 Building Technologies...