Debug Information - Siemens DESIGO PXM20 User Manual

Note
Note The time entry is only valid once a PXC automation station has been
Error category
Message text
Address in
the program
Time of
occurrence
62/70
Siemens
Building Technologies
11.3

Debug information

These settings are not visible to all users.
Debug information is helpful for troubleshooting, and is intended
exclusively for development engineers.
The latest entries are always displayed at the end of the list.
identified.
Select Debug information from the Alarming & functions dialog
box.
Figure 11-7 Debug information
This dialog box contains the following information:
Error category (letter at the beginning of the line):
C: Information
F: Fatal error
The following is an example of message text:
PXM20 application started
This address indicates where the error occurred. This information
can be useful for troubleshooting.
Example:
Addr: 0x8C6434
The time at which the error occurred. The format is as follows:
Day, month, minute, second and millisecond since 01.01.1970
00:00.
Example: 11801 DAYS 09:25:06.000
PXM20 / PXM20-E operator unit
Service support
E Error
B: Reboot
CM110754en_02
17 Dec 2009