Alarm Acknowledgement; Displaying The Alarm Viewer - Siemens DESIGO PXM20 User Manual

Symbols in the alarm pop-up
Deleting a pop-up
Canceling
audible signal
Siemens
Building Technologies
Unacknowledged alarm
Alarm state acknowledged
Normal state, existing alarm unacknowledged
Normal state, unreset
(only used for Extended alarms. In such cases, reset the alarm.)
System event
Press ESC to delete a pop-up window without affecting the alarm or
event.
An audible signal can also be canceled by deleting the associated
pop-up window with ESC.
7.2

Alarm acknowledgement

All alarms still requiring acknowledgement are listed in the Alarm
viewer.
7.2.1

Displaying the alarm viewer

You can go to the Alarm viewer either from the
Alarming & functions window, or display it directly from the alarm
pop-up.
Figure 7-2 Alarm viewer
PXM20 / PXM20-E operator unit
Alarms
35/70
CM110754en_02
17 Dec 2009