Login - Siemens DESIGO PXM20 User Manual

Note
Logging in to
another site
Siemens
Building Technologies
2. Select RESCAN NETWORK to look for all the devices on the
network. In this case, access to the system is via an automation
station defined as the back-up server.
3. Commissioning and service engineers can carry out a wiring test
with the WIRING TEST option (see Section 11)
4.2

Login

1. Log in to the selected site with your user name and password.
2. You will then be asked to enter your password.
3. Select the required letters, numbers or characters and use the
<+> key to enter them in the password field. These inputs can be
deleted using the <–> key.
Note that wildcard characters (*) are used to represent the
password in the password field. You can cancel password
entry at any time by pressing ESC.
4. Press OK to confirm the password entered.
Before you can log in to a new site, you must first log out from the
current site (see the next section).
PXM20 / PXM20-E operator unit
Login and log-out
27/70
CM110754en_02
17 Dec 2009