Example: Editing The Heating Curve - Siemens DESIGO PXM20 User Manual

Two display
formats
List view of heating
curve
32/70
Siemens
Building Technologies
6.2 Example: Editing the heating
curve
The heating curve is used to determine the flow temperature setpoint
for weather-compensated flow temperature control.
There are two ways of setting the heating curve values using the
PXM20 operator unit. Either the main parameters can be displayed
in graph form, or all the parameters, inputs and outputs can be
displayed in list form. .
Figure 6-3 Graphic view of heating curve
Select LIST VIEW for access to a list of all parameters, inputs and
outputs.
Figure 6-4 Heating curve: list view, page 1
PXM20 / PXM20-E operator unit
Reading and editing values
CM110754en_02
17 Dec 2009