Display Long Texts; Buzzer; Alarm Pop-Up; Event Pop-Up - Siemens DESIGO PXM20 User Manual

Siemens
Building Technologies
3.2.6

Display long texts

Use this option to define whether or not a long text item should be
displayed on two lines.
3.2.7

Buzzer

Use this option to specify whether or not alarms are to be indicated
with an audible signal. This is only possible if a user is logged in, and
provided that the alarms are displayed in pop-up windows. Audible
signals are only available for alarms which require acknowledgement
or acknowledgement and rest.
3.2.8

Alarm pop-up

Use this option to define whether or not alarms should be displayed
in pop-up windows.
3.2.9

Event Pop-up

Use this option to define whether or not events should be displayed
in pop-up windows.
3.2.10

Alarm text mode

5. This allows you to specify how alarms and events are to be
displayed in the Alarm viewer and Alarm & event history.
6. If you select Description, a generic description of the object will
be displayed.
3.2.11

Relogin

This setting enables you to specify that a user must log in again after
the display saver has been switched on.
3.2.12

Display saver on

This option lets you define the time period (from 5 to 60 minutes in 5-
minute increments) after which the display saver is to switch on.
PXM20 / PXM20-E operator unit
Settings
23/70
CM110754en_02
17 Dec 2009