Tire Specifications - Buell 2005 P3 Service Manual

HOME

TIRE SPECIFICATIONS

GENERAL
11 1
WARNING
Match tires, tubes, air valves and caps to the correct
wheel rim. Contact a Harley-Davidson dealer. Mismatch-
ing can result in damage to the tire bead, allow tire slip-
page on the rim or cause tire failure, which could result
in death or serious injury. (00023a).
WHEEL SIZE
& POSITION
16 in. – Front
16 in. – Rear
2-4 2005 Buell P3: Chassis
WARNING
Table 2-5. Tire Fitment-Tubeless Cast Wheels
CONTOUR &
RIM SIZE
MT 2.5 x 16.0 DOT
MT 2.75 x 16.0 DOT
Tire sizes are molded on the sidewall. Rim size and contour
are marked on the rim's exterior surface.
Example: MT 2.5 x 16.0 DOT
MT designates the rim contour.
2.5 is the width of the bead seat measured in inches.
16.0 is the normal diameter of the rim in inches, mea-
sured at the bead seat diameter.
DOT means that the rim meets Department of Transpor-
tation Federal Motor Vehicle Safety Standards.
Refer to Table 2-5.
RIM VALVE
HOLE DIAMETER
0.33 in. (8.38 mm)
0.33 in. (8.38 mm)
DUNLOP RADIAL TIRE SIZE
100/80 16 K330
120/80 16 K330
2.2