Rear Fender Removal; Rear Fender Installation - Buell 2005 P3 Service Manual

HOME

REAR FENDER REMOVAL

1. Remove seat. See 2.28
2. Remove right side footpeg support. See
PEGS AND FOOTPEG SUPPORT
a0012xSx
2
1
1. Screws, rear fender mounting (4)
2. Washers (4)
3. Well nuts (4)
4. Clamp, rear brake line
5. Fender, rear
Figure 2-108. Rear Fender Assembly
3. See Figure 2-108. Remove rear fender mounting screws
and washers from rear fender.
4. Remove rear fender.
2-62 2005 Buell P3: Chassis
SEAT.
2.21 FOOT-
BRACKETS.
5
4
3

REAR FENDER INSTALLATION

1. Position rear fender.
2. Install rear fender mounting screws, washers and well-
nuts on rear fender.
3. Tighten rear fender mounting screws to 30-36 in-lbs (3-
4 Nm).
4. Install right side footrest support bracket. See
FOOTPEGS AND FOOTPEG SUPPORT BRACKETS.
11 1
WARNING
After installing seat, pull upward on front of seat to be
sure it is in locked position. While riding, a loose seat can
shift causing loss of control, which could result in death
or serious injury. (00070a)
5. Install seat. See 2.28 SEAT.
WARNING
2.21