Tire Specifications - Buell 2002 S3T Service Manual

HOME

TIRE SPECIFICATIONS

GENERAL
11 1
WARNING
Tires must be correctly matched to wheel rims. Only the
tires listed in the fitment tables below can be used for
replacement. Mismatching tires and rims can cause dam-
age to the tire bead during mounting. Using tires other
than those specified can adversely affect motorcycle
handling and could result in death or serious injury.
WHEEL SIZE
& POSITION
17 in. – Front
17 in. – Rear
Table 2-2. Tire Fitment-Tubeless Aluminum P/M Wheels
WHEEL SIZE
& POSITION
17 in. – Front
17 in. – Rear
2-4 2002 Buell S3T: Chassis
WARNING
Table 2-1. Tire Fitment-Tubeless Cast Wheels
CONTOUR &
RIM SIZE
MT 3.5 x 17.0 DOT
MT 5.0 x 17.0 DOT
CONTOUR &
RIM SIZE
MT 3.5 x 17.0 DOT
MT 5.5 x 17.0 DOT
Tire sizes are molded on the sidewall. Rim size and contour
are marked on the rim's exterior surface.
Example: MT 3.5 x 17.0 DOT
●
MT designates the rim contour.
●
3.5 is the width of the bead seat measured in inches.
●
17.0 is the normal diameter of the rim in inches, mea-
sured at the bead seat diameter.
●
DOT means that the rim meets Department of Transpor-
tation Federal Motor Vehicle Safety Standards.
See the tables below.
RIM VALVE DUNLOP SPORTMAX II TOURING
HOLE DIAMETER
0.33 in.
0.33 in.
RIM VALVE DUNLOP SPORTMAX II TOURING
HOLE DIAMETER
0.33 in.
0.33 in.
2.2
RADIAL TIRE SIZE
120/70 ZR17 D205F
170/60 ZR17 D205
RADIAL TIRE SIZE
120/70 ZR17 D205F
170/60 ZR17 D205