Tire Specifications - Buell 2004 XB9S Service Manual

HOME

TIRE SPECIFICATIONS

GENERAL
11 1
WARNING
Tires must be correctly matched to wheel rims. Only the
tires listed in the fitment tables below can be used for
replacement. Mismatching tires and rims can cause dam-
age to the tire bead during mounting. Using tires other
than those specified can adversely affect motorcycle
handling and could result in death or serious injury.
See Figure 2-1. Tire sizes are molded on the sidewall. Rim
size and contour are marked on the rim's exterior surface.
Example: MT 3.5 x 17.0 DOT
MT designates the rim contour.
3.5 is the width of the bead seat measured in inches.
17.0 is the normal diameter of the rim in inches, mea-
sured at the bead seat diameter.
DOT means that the rim meets Department of Transpor-
tation Federal Motor Vehicle Safety Standards. Refer to
Table 2-7.
WHEEL SIZE
& POSITION
17 in. – Front
17 in. – Rear
2-4 2004 Buell Lightning: Chassis
WARNING
Table 2-7. Tire Fitment-Tubeless Cast Wheels
CONTOUR &
RIM SIZE
MT 3.5 x 17.0 DOT
MT 5.5 x 17.0 DOT
8423
Figure 2-1. Rim Markings
RIM VALVE DUNLOP SPORTMAX RADIAL II
HOLE DIAMETER
0.33 in.
0.33 in.
2.2
TIRE SIZE
120/70 ZR17 D207FY
180/55 ZR17 D207U