Windscreen - Buell 2005 P3 Service Manual

HOME

WINDSCREEN

REMOVAL
1. See Figure 2-111. Remove two screws and nylon wash-
ers on each side.
3779
Figure 2-111. Remove Screws
2. Remove windscreen.
3797
Figure 2-112. Windscreen Trim
3. See Figure 2-112. Remove windscreen trim.
4. Remove windscreen mounting brackets, if required. See
7.17 HEADLAMP.
2-66 2005 Buell P3: Chassis
INSTALLATION
1. If removed, install both windscreen brackets. See
HEADLAMP.
2. Verify trim is installed on windscreen.
3. See Figure 2-111. Install two screws and nylon washers
on each side. Tighten screws to 9-11 in-lbs (1-1.2 Nm).
2.26
7.17