Huawei Quidway S9300 Configuration Manual page 164

3 DHCP Snooping Configuration
2.
3-54
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=1 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=1 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=1 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
Enable basic MPLS functions and LDP on the MPLS backbone network.
# Configure PE1.
[PE1] mpls lsr-id 1.1.1.9
[PE1] mpls
[PE1-mpls] quit
[PE1] mpls ldp
[PE1-mpls-ldp] quit
[PE1] interface vlanif 10
[PE1-Vlanif10] mpls
[PE1-Vlanif10] mpls ldp
[PE1-Vlanif10] quit
# Configure PE2.
[PE2] mpls lsr-id 2.2.2.9
[PE2] mpls
[PE2-mpls] quit
[PE2] mpls ldp
[PE2-mpls-ldp] quit
[PE2] interface vlanif 10
[PE2-Vlanif10] mpls
[PE2-Vlanif10] mpls ldp
[PE2-Vlanif10] quit
After the configuration, run the display mpls ldp session command on PE1 or PE2. You
can view that the Status item of the peer between PE1 and PE2 is Operational, which
indicates that the peer relation is established. Run the display mpls lsp command, and you
can view the establishment of the LSP.
Take the display on PE1 as an example.
<PE1> display mpls ldp session
LDP Session(s) in Public Network
------------------------------------------------------------------------------
Peer-ID Status
------------------------------------------------------------------------------
2.2.2.9:0 Operational DU
------------------------------------------------------------------------------
TOTAL: 1 session(s) Found.
LAM : Label Advertisement Mode
<PE1> display mpls ldp lsp
LDP LSP Information
------------------------------------------------------------------------------
SN
Interface
------------------------------------------------------------------------------
1
InLoop0
2
Vlanif10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LAM SsnRole
Passive
SsnAge Unit : DDD:HH:MM
DestAddress/Mask In/OutLabel
1.1.1.9/32 3/NULL
2.2.2.9/32 NULL/3
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
SsnAge KA-Sent/Rcv
000:00:01 7/6
Next-Hop
127.0.0.1
100.1.1.2
Issue 06 (2010–01–08)
In/Out-
Vlanif10/
-------/