Enabling Global Mff; Configuring The Mff Network Interface - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
No.
1
2
3
4

8.3.2 Enabling Global MFF

Context
You can perform other MFF configurations only after enabling the global MFF.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mac-forced-forwarding enable
The global MFF is enabled.
By default, the global MFF is disabled.
----End

8.3.3 Configuring the MFF Network Interface

Context
The MFF function of a VLAN takes effect after you configure at least one network interface on
the VLAN.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
Issue 06 (2010–01–08)
Data
VLAN ID of the MFF device
Type and number of the network interface to be configured
(Optional) IP address of the static gateway to be configured
(Optional) IP address of the server to be configured
NOTE
This task can be performed before the global MFF is enabled; however, it takes effect only after the global
MFF is enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 MFF Configuration
8-5