Configuring A Service Scheme; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
<Quidway> display hwtacacs-server template hhh
---------------------------------------------------------------------
HWTACACS-server template name
Primary-authentication-server
Primary-authorization-server
Primary-accounting-server
Secondary-authentication-server : 0.0.0.0:0
Secondary-authorization-server
Secondary-accounting-server
Current-authentication-server
Current-authorization-server
Current-accounting-server
Source-IP-address
Shared-key
Quiet-interval(min)
Response-timeout-Interval(sec)
Domain-included
Traffic-unit
---------------------------------------------------------------------
Total 1,1 printed

1.6 Configuring a Service Scheme

This section describes how to configure a service scheme in the S9300 to store authorization
information about users.

1.6.1 Establishing the Configuration Task

1.6.2 Creating a Service Scheme
1.6.3 Setting the Administrator Level
1.6.4 Configuring a DHCP Server Group
1.6.5 Configuring an Address Pool
1.6.6 Configure Primary and Secondary DNS Servers
1.6.7 Checking the Configuration
1.6.1 Establishing the Configuration Task
Applicable Environment
Access users must acquire authorization information before getting online. Authorization
information about users can be managed through the service scheme.
Pre-configuration Tasks
Before configuring a service scheme, complete the following tasks:
l
l
Data Preparation
To configure a service scheme, you need the following data.
Issue 06 (2010–01–08)
Creating a DHCP server group
Creating an address pool
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
: hhh
: 100.1.1.2:26
: 100.1.1.3:26
: 0.0.0.0:0
: 0.0.0.0:0
: 0.0.0.0:0
: 100.1.1.2:26
: 100.1.1.3:26
: 0.0.0.0:0
: 0.0.0.0
: lsj
: 5
: 20
: Yes
: B
1-25