Checking The Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
The RADIUS server template view is displayed.
Step 3 Run:
radius-server nas-port-format { new | old }
The format of NAS port used by the RADIUS server is specified.
By default, the new format of NAS port is used.
Step 4 Run:
radius-server nas-port-id-format { new | old }
The format of the NAS port ID used by the RADIUS server is specified.
By default, the new format of the NAS port ID is used.
----End

1.4.11 Checking the Configuration

Prerequisite
The configurations of the RADIUS server template are complete.
Procedure
l
----End
Example
After completing the configurations of the RADIUS server template, you can run the display
radius-server configuration command to check the configuration of all templates.
<Quidway> display radius-server configuration
-------------------------------------------------------------------
Server-template-name
Protocol-version
Traffic-unit
Shared-secret-key
Timeout-interval(in second)
Primary-authentication-server
Primary-accounting-server
Secondary-authentication-server
Secondary-accounting-server
Retransmission
Domain-included
-------------------------------------------------------------------
-------------------------------------------------------------------
Server-template-name
Protocol-version
Traffic-unit
Shared-secret-key
Timeout-interval(in second)
Primary-authentication-server
Primary-accounting-server
Issue 06 (2010–01–08)
Run the display radius-server configuration [ template template-name ] command to
check the configuration of the RADIUS server template.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
: radius
: standard
: B
: huawei
: 5
: 0.0.0.0; 0; LoopBack:NULL
: 0.0.0.0; 0; LoopBack:NULL
: 0.0.0.0; 0; LoopBack:NULL
: 0.0.0.0; 0; LoopBack:NULL
: 3
: YES
: test
: standard
: B
: hello
: 5
: 10.1.1.2; 1812;
: 10.1.1.2; 1812;
LoopBack:NULL
LoopBack:NULL
1-17