Table of Contents
Advertisement
LevelOne Broadband Router User Guide
No Router, no DHCP
If your LAN is NOT using DHCP and does NOT contain a router,
check the following settings for each PC:
IP Address
Ensure that the IP Address for each PC is unique, and is from the
same address range as the LevelOne Broadband Router's Device
IP Address, as set on the LAN Port screen.
For example, if the LevelOne Broadband Router uses the default
IP Address (192.168.0.1) and Network Mask (255.255.255.0), the
PCs must use addresses from 192.168.0.2 to 192.168.0.254.
Network Mask
All PCs, and the LevelOne Broadband Router, need to be using
the same value for the Network Mask. The default value is
255.255.255.0. On the LevelOne Broadband Router, this value is
set on the LAN Port screen.
Gateway
Set the Default Gateway Address to the LevelOne Broadband
Router's IP address (Device IP Address, as set on the LAN Port
screen). The default IP Address is 192.168.0.1.
DNS (Domain Name Server) Address
This should match the DNS address entered into the DNS IP Ad-
dress field on the LAN Port screen.
34
Advertisement
Table of Contents
