Table of Contents
Advertisement
Data - LAN Port
Device IP Ad-
dress
Network Mask
Data - DHCP Server
A DHCP (Dynamic Host Configuration Protocol) server provides a
valid IP address (and the Gateway and DNS addresses) to a DHCP
client (PC or device) upon request. The LevelOne Broadband Router
can act as a DHCP server .
To use this feature:
•
The LevelOne Broadband Router must be configured with the
following data.
•
The PCs must be configured to act as DHCP clients . This proce-
dure is explained in Chapter 5 - DHCP.
Operation
IP address for the LevelOne Broadband
Router. Use the default value of 192.168.0.1
unless the address is already in use or your
LAN is using a different IP address range. In
the latter case, use an IP Address from within
the range used by your LAN.
The default value 255.255.255.0 is standard
for small (class "C") networks. For other
networks, use the Network Mask for the LAN
segment to which the LevelOne Broadband
Router is attached. i.e. the same value as the
PCs on that LAN segment.
If Enabled, the LevelOne Broadband Router
will function as a DHCP server. The default
value is Enabled.
If you already have a DHCP Server, this
must be DISABLED .
Configuration
17
Advertisement
Table of Contents
