Table of Contents
Advertisement
LevelOne Broadband Router User Guide
Direct Connection Screen
•
Note that if IP Address entries are shown when DHCP Client is
selected, then these values were supplied by the DHCP server on
the remote LAN.
•
The Retrieve Defaults button will recover the default Device Name
and clear the other items. After clicking this button, you must click
Save to restore the default values to the LevelOne Broadband
Router.
Data - WAN Port
Device Name
20
Figure 8: WAN Port - Direct Connection
Used for identification. Normally, there is no
need to change the default name, but if your ISP
requests that you use a particular name, enter it
here. This name will be provided to, and re-
corded by, the remote DHCP Server.
Advertisement
Table of Contents
