LevelOne Broadband Router User Guide
LINK/ERR LED
WAN LED
DIP switches
LED Table
The LINK/ERR LED will flash in GREEN during normal operation, as
data is transmitted or received through the LAN port. YELLOW indi-
cates an error. Possible LED states are shown below.
LINK/ERR LED
On
(Orange, then
Green)
On (Green)
Flashing
(Green)
6
On (Green) - Normal start up/power on
sequence, or idle.
The LINK/ERR LED will flash under the
following conditions:
•
Flashing (Green) – Data is being
transmitted or received through the
LAN port.
•
Flashing (Orange, Green, Or-
ange,...) – Hardware error. Contact
your dealer for technical support.
This will flash during normal operation,
when data is transmitted or received
through the WAN port.
Refer to DIP Switches on page 8.
WAN LED
On
On
Flashing
Description
Normal start up (power ON)
sequence.
Idle.
Normal Operation.
The LINK/ERR LED will flash
when data is transmitted or re-
ceived through the LAN port.
The WAN LED will flash when