Table of Contents
Advertisement
LevelOne Broadband Router User Guide
•
To Enable a defined Application
Select it from the drop-down list
Click "Get Data"
Check the Enable checkbox
Click "Update"
•
To Disable a defined Application
As above, but uncheck the Enable checkbox.
•
To Delete a defined Application
Select it from the drop-down list,
Click "Delete"
•
To Modify (Edit) a defined Application
Select it from the drop-down list,
Click "Get Data"
Make any desired changes
Click "Update"
•
To Create a new Application
Click "Clear Form"
Enter the required data, as described below
Click "Add"
•
To List all Applications
Click "List All"
Configuration Data (from Service Provider)
This data must be obtained from the service provider.
Name
Enable
Outgoing Control
Protocol
Port Range:
Start
54
Enter a descriptive name to identify this application
entry.
Use this to Enable or Disable support for this applica-
tion, as required.
The protocol (TCP or UDP) used when you connect
to the special application service.
The beginning of the range of port numbers used by
the application server, for data you send to it. If the
Advertisement
Table of Contents
