Table of Contents
Advertisement
Advanced Internet
Configuring the Exposed Computer
Select Advanced Internet from the navigation bar, then Exposed
Computer. You will see a screen like the following:
Figure 27: Exposed Computer Screen
Data
The only data required is the LAN IP Address. Enter the IP Address of
the PC on your LAN which will become the "Exposed Computer".
Checking
Once configured and enabled, the Exposed Computer should respond
to a "ping" from any PC connected to the Internet. The "ping" com-
mand can be entered in the Run dialog, as follows:
ping ip_address
Where ip_address is the IP Address shown on the WAN Port
screen of this device.
63
Advertisement
Table of Contents
