Using Dhcp - LevelOne FBR-1100TX User Manual

Hide thumbs Also See for FBR-1100TX:
Table of Contents

Advertisement

Using DHCP

If you are already using DHCP, the radio button Obtain an IP
Address automatically (in Figure 14) will be checked, and no
changes are required.
If you already have a DHCP Server, the LAN Administrator should
check the DHCP Server configuration, as described in Checking
your DHCP Server on page 40. Also, the DHCP Server function in
the LevelOne Broadband Router should be turned OFF. This set-
ting is on the Internal LAN Port screen.
If you were not using DHCP, but now wish to do so, click on the
radio button "Obtain an IP address automatically" (as in Figure 14).
For more details, refer to Using the DHCP Server on page 41.
PC Configuration
33

Advertisement

Table of Contents
loading

Table of Contents