Checking Your Dhcp Server - LevelOne FBR-1100TX User Manual

LevelOne Broadband Router User Guide

Checking your DHCP Server

If you already have a DHCP Server:
•
Check that the DHCP Server function in the LevelOne Broadband
Router is Disabled. This setting is on the LAN Port screen.
•
Check your DHCP Server, and ensure that:
•
IP Address assigned to LevelOne Broadband Router (Device
IP Address, set on the LAN Port screen) is compatible with the
Address range used by the DHCP Server.
•
Network Mask matches the value entered on the LevelOne
Broadband Router's LAN Port screen.
•
DNS IP Address matches the value entered on the LevelOne
Broadband Router's LAN Port screen.
•
Gateway is set correctly. This depends on whether or not you
have a router installed on your LAN, as shown by the following
table.
No
Router
Router
40
Set the Default Gateway Address to the IP address
(Device IP Address, set on the LAN Port screen)
assigned to the LevelOne Broadband Router. The
default IP Address is 192.168.0.1.
Do not change the Default Gateway Address. Instead,
the router must be configured as explained in Chapter
6 - Routing.