Network
Mask
Gateway
IP Address
Interface
Metric
Router Configuration
It is essential that all IP packets for devices not on the local LAN be
passed to the LevelOne Broadband Router, so that they can be for-
warded to the Internet. To achieve this, the local LAN must be
configured to use the LevelOne Broadband Router as the Default
Route or Default Gateway.
Local Router
The local router is the Router installed on the same LAN segment as
the LevelOne Broadband Router. This router requires that the Default
Route is the LevelOne Broadband Router itself. Typically, routers have
a special entry for the Default Route. It should be configured as fol-
lows.
Destination IP Ad-
dress
Network Mask
The Network Mask used on the remote LAN
segment. For class "C" networks, the standard
Network Mask is 255.255.255.0
The IP Address of the Router on the LAN segment
to which this device is attached. (NOT the router
on the remote LAN segment.)
Select the appropriate interface - LAN (Internal
LAN) or WAN from the drop-down list.
The number of routers which must be traversed to
reach the remote LAN segment. The default value
is 1.
Normally 0.0.0.0, but check your router
documentation.
Normally 0.0.0.0, but check your router
documentation.
Routing
45