Table of Contents
Advertisement
Using the DHCP Server
To use the LevelOne Broadband Router's built-in DHCP Server func-
tion:
•
Ensure that the LevelOne Broadband Router's DHCP Server is
Enabled , and the other DHCP data is correct. (Check the Internal
LAN Port screen).
•
Configure your PCs to act as DHCP clients, as described below.
To configure your PCs to use DHCP
Your PCs must be configured to act as DHCP clients. For Windows
95, the procedure is detailed below. For other operating systems,
check your system documentation.
Windows 95 DHCP Client Setup
1. Select Control Panel - Network. You should see a screen like the
following:
2. Select the TCP/IP protocol for your network card.
3. Click on the Properties button. You should then see a screen like
the following.
Figure 17: Network Configuration
DHCP
41
Advertisement
Table of Contents
