Configuring Bgp Policies - Avaya 1000 Series Configuration Manual

Configuring BGP Features
3rdPartyRouter>show ip bgp
Pull back the announced route 150.1.1.0/24
Avaya1/config term>router bgp 100
Avaya1/config term/router bgp 100>no redistribute rip
View the bgp table of 3rdPartyRouter to see the routes.
3rdPartyRouter>show ip bgp

Configuring BGP Policies

BGP policies can be applied to a neighbor or a group of neighbors. Policies are used to control
the inflow/outflow mechanism of routes. The policy can be configured to filter in/out routes,
change PATH information, route attributes, communities, metric values etc.
In Avaya's BGP Implementation the policy can be applied in different ways:
• OutBound ROUTE_MAP Policy can only be applied to a Neighbor group. InBound Policy
can only be applied to a neighbor directly.
• Filter list and Distribute list also can be applied only to a neighbor group for OUTBOUND
and per neighbor for INBOUND.
Avaya1 has established EBGP Session with neighbors, 3rdPartyRouter and Avaya2.
Avaya1> show ip bgp summary
BGP router identifier 30.30.30.1, local AS number 100
Neighbor
20.1.1.2
30.30.30.3
312 Avaya Secure Router 1000 Series Configuration Guide
V AS MsgRcvd
4 300 5
4 200 27
MsgSent State
8 Established
25 Established
Up/Down
00:04:11
00:20:43
December 2010